EFD-RD1 Digital Remote Monitor

• Connected to the EFG-8000 gauge Data outputs.
• Each EFG-RD1 remote monitors one EFG-8000 gauge.
• Alpha-numeric LCD display indicates gallons, low level alarm condition, high level alarm condition, gauge diagnostics and absence of signal from gauge.
• Powered by 120 AC to 9 volt DC transformer (included).
• Assembled in 4" diameter aluminum housing, available in standard single gang configurations also.
• Not for use in hazardous locations, recommended for indoor use.
• Provides silent remote indications of level alarms.

Remote Visual Alarm Monitor

• Use with EFG-8000 high/low gauge only.
• Each remote monitors one EFG-8000 gauge.
  
• Includes:  Test button, LED visual alarm,

EFC - 420.1 is a 4-20mA DATA CONVERTER
with 4 form "C" control relays

• Used with EFG-8000 data output terminal, you can monitor the liquid level in a multitude of ways. Connect into generator control panels, control other equipment, alarms, computer data logging functions and controls, and various site indicators. This converter makes it possible for your gauge to do a wide variety of monitoring and/or control functions by adding the FGC-42-.1
• Each of the 4 relays are configured in a form "C" output / Externally powered by 12-24 V AC or DC.

Interstitial Alarm Assembly

• Use with EFG-8000 interstitial alarm gauge only.
• Visual alarm indicator at the gauge console.
• Audible alarm indicator at the gauge console.
• Easy to install and connect to the EFG-8000 gauge console.
• Normally closed circuit, will trigger alarms when liquid is detected in the interstitial area or when the circuit is breached.

Stand Alone Interstitial Alarm

• Audible 100 db alarm by MECO, Inc.
• Intrinsically safe.
• Powered by one (1) 9 volt lithium battery (included).
• Single push-button test/reset switch.
• Easily connected to interstitial float switch.
  
• Includes:  MECO, Inc. alarm box, Interstitial float assembly.